SkyTrak+ Manuals & Guides
The SkyTrak+ is one of the newest launch monitors from SkyTrak. The setup process was designed to be as easy as possible! See below for some helpful setup guides for the SkyTrak+ Launch Monitor:
SkyTrak+ Quick Start Guide
SkyTrak+ Product Info Guide
How to Connect your SkYTrak+
Connecting your device (iOS or PC) to unit
STEP 1: Please turn your unit on and go to your PC's WI-FI. You should see your units WI-FI there. Select this and enter the password below: skytrak plus
STEP 2: After successfully connecting please go back to your Skytrak software and in the top right where it says connecting click there and select "Network Mode". Scan for your local network and enter your password.
STEP 3: Congratulations! You're all set.
Connecting your unit to software
STEP 1: Please unbox your unit and charge it.
STEP 2: Go to https://skytrakgolf.com/
STEP 3: Stay on this page and in the top right you should see "Clubhouse". Click here and create your Skytrak account.
STEP 4: Once your account is made it's going to ask you for an ESN number which can be found at the bottom of your unit or on the box your unit came in.
STEP 5: After successfully entering your SN. Look on the right hand side for "Prepaid Card" and enter your Essential plan code if purchased.
STEP 6: When that is done Skytrak will then send you the download link and information for E6 along with your License key.